www.phihong.com single port poe gigabit switch powered by ultra poe extends ethernet data and poe to 200 meters features ? ieee802.3at compliant output ? powered by ultra poe ? 0-55c operating temperature range ? detects 12.5k signa ture resistance ? gigabit compatible ? boost circuit to compensate for wire drops ? extends ethernet to 200 meters ? 1 year warranty applications ? ip cameras ? wireless access points ? access controls safety approvals ? ce mechanical characteristics ? length: 120mm (4.72in) ? height: 32mm (1.26in) ? width: 60mm (2.36in) ? weight: 0.6kg (1.3lb) output specifications phihong is not responsible for any error, and reserves the righ t to make changes without notice. please visit our website at www.phihong.com for the most up-to-date specifications and co ntact information. model dc output voltage output current output power min. typ. max. min. max. POE30S-1ATG 54v 56v 57v 10ma 550ma 30w
POE30S-1ATG characteristics www.phihong.com input: input source receives power from ultra poe midspan input detection 12.5k detection dc input voltage range 50vdc to 57vdc dc input current 1.6a at 57vdc and maximum load output: total output power 30w with ultra poe input ripple and noise (vp-p) 250mv maximum output detection 25k detection ieee802.3at compliance efficiency 75% minimum at maximum load environmental operating temperature 0 to 40c (gigabit data rates) operating temperature 0 to 55c (10mb and 100mb data rates) storage temperature -25 to +65c humidity 5 to 90% emi en55022 class a, fcc part 15 class a warranty 1 year immunity esd en61000-4-2 level 3 rs en61000-4-3 level 3 surge en61000-4-5 level 2 isolation (hi-pot) 2121vdc for 1 min, 10ma insulation resistance input to ground: >10m ohm 500vdc output to ground: >10m ohm 500vdc features over current protection for poe class 0-3 detection on output: 450ma maximum for poe class 4 detection on output:650ma maximum short circuit protection outputs equipped with short circuit protection the output can be shorted permanently without damage indicators ethernet ? in/out green led1 and led2 - 10mb activity green led1 ? 100mb activity green led2 ? 1gb activity orange led3 ? link activity poe blinking green ? unit is on active with no load solid green ? unit has detected a valid ieee802.3at load blinking red/green ? unit has detected an invalid load solid red ? unit is in over-load condition input/output connectors rj45 input connection pins: 1,2 7,8 gnd / pins: 3,6 4,5 +vin output connection pins: 1,2 gnd / pins: 3,6 +vin
dimension diagram unit: mm www.phihong.com
|